ROBERTS CONSOLIDATED INDJSTRIES -- WELDWOOD PLASTIC RESIN GLUE  -- 8040-01-111-2190
<pre>=====================  Product Identification  =====================

Product ID:WELDWOOD PLASTIC RESIN GLUE
MSDS Date:01/01/1985
FSC:8040
NIIN:01-111-2190
=== Responsible Party ===
Company Name:ROBERTS CONSOLIDATED INDJSTRIES
Emergency Phone Num:616-381-1100
CAGE:16882
=== Contractor Identification ===
Company Name:ROBERTS CONSOLIDATED INDUSTRIES
Address:600 N BALDWIN PARK BLVD
Box:City:CITY OF INDUSTRY
State:CA
ZIP:91749
Country:US
CAGE:16882

=============  Composition/Information on Ingredients  =============

Ingred Name:UREA-FORMALDEHYDE RESIN
CAS:9011-05-6
RTECS #:YU1610000
Fraction by Wt: 80%
ACGIH TLV:5 PPM(MFR)

Ingred Name:FORMALDEHYDE  (SARA III)
CAS:50-00-0
RTECS #:LP8925000
Fraction by Wt: 2%
OSHA PEL:SEE 1910.1048
ACGIH TLV:C 0.3 PPM; A2; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:SODIUM HYDROXIDE  (SARA III)
CAS:1310-73-2
RTECS #:WB4900000
Fraction by Wt: 0.05%
OSHA PEL:2 MG/M3
ACGIH TLV:C 2 MG/M3; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:FORMIC ACID  (SARA III)
CAS:64-18-6
RTECS #:LQ4900000
Fraction by Wt: 0.02%
OSHA PEL:5 PPM
ACGIH TLV:5 PPM/10 STEL; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:AMMONIUM SULFATE (SOLUTION)  (SARA III)
CAS:7783-20-2
RTECS #:BS4500000
Fraction by Wt: 2%

=====================  Hazards Identification  =====================

Effects of Overexposure:IRRITATION OF SKIN,EYES OR RESPIRATORY PASSAGES
    CAUSING COUGHING, INGESTION:NAUSEA,VOMITING,IRRIT

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH WITH WATER 15 MIN,CONSULT PHYSICIAN.SKIN:WASH WITH
    SOAP & WATER. INHALATION: IF COUGHING PERSISTS,SEE A
    PHYSICIAN.INGESTION:CONSULT PHYSICIAN IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:>200F/93C (TCC)
Extinguishing Media:WATER,CO*2,FOAM,DRY CHEMICAL

==================  Accidental Release Measures  ==================

Spill Release Procedures:KEEP DRY & SWEEP OR VACUUM MATERIAL UP,OR
    DILUTE ALREADY MIXED GLUE WITH COOL WATER AS QUICKLY AS POSSIBEL.
    WIPE OR MOP UP. PLACE IN DISPOSABLE CONTAINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL DRY PLACE BETWEEN 60 &
    80F, KEEP CONTAINER COVERED. DO NOT USE AT TEMPERATURE BELOW 70F.
    KEEP AWAY FROM HEAT & MOISTURE.
Other Precautions:AVOID BREATHING DUST OR VAPOR.KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
    EXPOSURE OF CONCERN.
Ventilation:LOCAL/GENERAL EXHAUST
Protective Gloves:REQUIRED
Eye Protection:GOGGLES
Other Protective Equipment:SAFETY SHOES
Supplemental Safety and Health
ADD INGREDIENT:FILLER 17.93%

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:58
Evaporation Rate &amp; Reference:<1
Percent Volatiles by Volume:<3

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL OR INCINERATE (DO NOT INCINERATE CLOSED
    CONTAINERS) AVOID LIQUID DISPOSAL (SEWER,ETC). CONSULT LOCAL
    DISPOSAL RESTRICTIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.