TRIAD PAINT AND CHEMICAL CORP -- STAIN -- 8010-00-281-2074
===================== Product Identification ===================== Product ID:STAIN MSDS Date:01/01/1987 FSC:8010 NIIN:00-281-2074 === Responsible Party === Company Name:TRIAD PAINT AND CHEMICAL CORP Address:810 EVERGREEN AVENUE City:BROOKLYN State:NY ZIP:11207 Country:US Info Phone Num:(718) 443-2778 Emergency Phone Num:(718) 443-2778 CAGE:33151 === Contractor Identification === Company Name:STEVEN INDUSTRIES Address:39 AVENUE C Box:8 City:BAYONNE State:NJ ZIP:07002-3417 Country:US Phone:201-437-6501 CAGE:33150 Company Name:TRIAD PAINT AND CHEMICAL CORP Address:810 EVERGREEN AVE Box:City:BROOKLYN State:NY ZIP:11207-1140 Country:US CAGE:33151 ============= Composition/Information on Ingredients ============= Ingred Name:MINERAL SPIRITS CAS:64741-41-9 Fraction by Wt: 62.4% ACGIH TLV:100 PPM ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Effects of Overexposure:EYES: MAY CAUSE IRRITATION. SKIN: MAY CAUSE DEFATTING. INHALATION: MAY CAUSE IRRITATION TO NOS E AND THROAT. REPEATED EXCESSIVE EXPO-SURE MAY RESULT IN HEADACHE, DIZZINESS, SLEEPINESS, AND NAUSEA. ======================= First Aid Measures ======================= First Aid:INHALATION: PROVIDE FRESH AIR AND REST. SKIN: WASH WITH MILD SOAP AND WATER. USE EMOLLIENT CREAM OR LOTION. EYES: WASH WITH A GENTLE STREAM OF WATE R FOR 10 MINUTES. SEE A DOCTOR. ===================== Fire Fighting Measures ===================== Flash Point Method:PMCC Flash Point:105F/41C Lower Limits:6.0 Upper Limits:1.0 Extinguishing Media:FOAM, CO2, DRY CHEMICAL Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS. WATER STREAM WILL SPREAD OIL FIRES. Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL SURFACES AND OTHER SOURCES OF IGNITION. VAPOR FORMS EXPLOSIVE MIXTURE BETWEEN UPPER AND LOWER EXPLOSIVE UNITS. ================== Accidental Release Measures ================== Spill Release Procedures:AVOID FLAME AND SPARK SOURCES. PROVIDE ADEQUATE VENTILATION. WIPE UP SPILL WITH INERT ABSORBENTS AND NON-SPARKING TOOLS. SAFELY DISCARD SATURATED ABSORBENTS. AVOID PROLONGED BREATHING OF VAPORS WHILE CLEANING UP SPILL. ====================== Handling and Storage ====================== Handling and Storage Precautions:AVOID OPEN FLAME AND SPARK SOURCES. PROVIDE ADEQUATE VENTILATION. AVOID EXCESSIVE HEAT. Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. AVOID PROLONGED OR REPEATED BREATHING OF VAPOR. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK IF VENTILATION IS INADEQUATE. Ventilation:MECHANICAL GENERAL WITH APPROVED CLASS D EXPLOSION PROOF MOTOR AND SWITCHES. Protective Gloves:NEOPRENE RUBBER GLOVES Eye Protection:CHEMICAL SAFETY GOGGLES Supplemental Safety and Health NK ================== Physical/Chemical Properties ================== HCC:F4 Vapor Pres:1@100F Vapor Density:5.0 Evaporation Rate & Reference:.13 Solubility in Water:NEG. Appearance and Odor:LIGHT WALNUT HYDROCARBON ODOR Percent Volatiles by Volume:72 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES AVOID STRONG OXIDIZING AGENTS Hazardous Decomposition Products:CO, CO2, ACRID FUMES AND SMOKE WHEN COMBUSTED. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSAL PROCEDURES MUST COMPLY WITH LOCAL, STATE,AND FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.