FREDERICKS/HANSEN PAINT CO INC -- FRANCISCAN SEMI-GLOSS ENAMEL  -- 8010-00N019843
<pre>=====================  Product Identification  =====================

Product ID:FRANCISCAN SEMI-GLOSS ENAMEL
MSDS Date:09/28/1988
FSC:8010
NIIN:00N019843
=== Responsible Party ===
Company Name:FREDERICKS/HANSEN PAINT CO INC
Box:5638
City:SAN BERNARDINO
State:CA
ZIP:92412
Country:US
Info Phone Num:714-885-6824
Emergency Phone Num:714-885-6824
CAGE:FO898
=== Contractor Identification ===
Company Name:FREDERICKS-HANSEN PAINT CO
Address:1595 E SAN BERNARDINO
Box:City:SAN BERNARDINO
State:CA
ZIP:92412
Country:US
Phone:714-885-6824
CAGE:54231
Company Name:FREDERICKS/HANSEN PAINT COMPANY INC
Box:5638
City:SAN BERNARDINO
State:CA
ZIP:92412
Phone:(714) 885-6824
CAGE:FO898

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:AMMONIA  (SARA III)
CAS:7664-41-7
RTECS #:BO0875000
Fraction by Wt: <1%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM/35 STEL; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE TO SKIN MAY CAUSE
    DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/WATER FOR AT LEAST 15 MINS. CALL MD. SKIN:WASH
    W/SOAP & WATER. APPLY SKIN OINTMENT. INGEST:GIVE LARGE QUANTITIES
    OF WATER. CALL MD. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING
    (GIVE O2/AR TIFICIAL RESPIRATION) .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT . USE WATER TO COOL CONTRS EXPOSED TO HEAT OR
    FLAME TO PREVENT BURSTING FROM PRESSURE BUILD UP.
Unusual Fire/Explosion Hazard:WATER BORNE PAINTS DO NOT BURN. THEY MAY
    SPATTER IF HEATED TO TEMPERATURES ABOVE THEIR BOILING POINT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN W/ABSORBENT MATERIAL & WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE W/ADEQUATE VENTILATION. AVOID
    BREATHING OF MIST. AVOID REPEATED OR PROLONGED SKIN OR EYE CONTACT.
Other Precautions:KEEP FROM FREEZING. KEEP AWAY FROM EXCESSIVE HEAT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMALLY NOT NEEDED. NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:USE MODERATE VENTILATION TO MINIMIZE EXPOSURE.
Protective Gloves:WATER RESISTANT PROTECTIVE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:225F,107C
Vapor Density:HVR/AIR
Spec Gravity:1.2579 
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:68

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IF HEATED TO DECOMPOSITION, ACRID
    FUMES WHICH CAN BE IRRITATING OR TOXIC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN A SANITARY LANDFILL IN ACCORDACE WITH LOCAL,
    STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.