HARRISON OIL CORP -- TWO CYCLE ENGINE OIL -- 9150-00N031428
===================== Product Identification ===================== Product ID:TWO CYCLE ENGINE OIL MSDS Date:01/01/1987 FSC:9150 NIIN:00N031428 === Responsible Party === Company Name:HARRISON OIL CORP Address:4267 N PORT WASHINGTON RD City:MILWAUKEE State:WI ZIP:53211 Country:US Info Phone Num:414-962-4000 Emergency Phone Num:414-962-4000 CAGE:5X833 === Contractor Identification === Company Name:HARRISON OIL CORP Address:4267 N PORT WASHINGTON RD Box:City:MILWAUKEE State:WI ZIP:53211 Country:US Phone:414-962-4000 CAGE:5X833 ============= Composition/Information on Ingredients ============= Ingred Name:MINERAL SPIRITS; (STODDARD SOLVENT - MINERAL SPIRITS) CAS:64742-88-7 Fraction by Wt: 10% OSHA PEL:100 PPM ACGIH TLV:100 PPM Ingred Name:ADDITIVES Fraction by Wt: 3-4% Ingred Name:REFINED PETROLEUM OIL-BLEND (CONSISTING OF INGREDIENTS 4 & 5) (PEL/TLV AS OIL MIST) RTECS #:9999999ZZ Fraction by Wt: 86% OSHA PEL:5 MG/M3 ACGIH TLV:5 MG/M3;10 STEL Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED LIGHT NAPHTHENIC; (NAPHTHENIC DISTILLATE) CAS:64742-53-6 RTECS #:PY8036000 Ingred Name:SOLVENT,DEWAXED RESIDUAL OIL (PETROLEUM); (PETROLEUM DISTILLATE) CAS:64742-62-7 Ingred Name:DYE Fraction by Wt: <0.1% ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO Health Hazards Acute and Chronic:LOW ORDER OF TOXICITY. CONTACT MAY CAUSE IRRITATION TO SENSITIVE SKIN. PROLONGED CONTACT MAY CAUSE SKIN DERMATITIS OR OIL ACNE. INHALATION MAY CAUSE DIZZINESS OR PULMONARY IRRITATION. INGESTION MAY CA USE CRAMPS OR DIARRHEA. Explanation of Carcinogenicity:CAS NO.64742-53-6 IS LISTED BY THE RTECS AS AN IARC GROUP 1 CARCINOGEN. Effects of Overexposure:BREATHING MISTS MAY CAUSE DIZZINESS OR PULMONARY IRRITATION. INGESTION MAY CAUSE CRAMPS OR DIARRHEA. PROLONGED CONTACT MAY CAUSE SKIN DERMATITIS OR OIL ACNE. Medical Cond Aggravated by Exposure:NONE ======================= First Aid Measures ======================= First Aid:INGEST:DO NOT INDUCE VOMIT, CONTAINS PETRO DISTILS. CALL MD IMMED. EYE:FLUSH W/LG VOLS OF WATER FOR AT LST 15 MINS & SEE MD. SKIN:WIPE FROM EXPOSED AREA, WASH W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR . SUPPORT BREATHING (GIVE O2/ARTF RESP). ===================== Fire Fighting Measures ===================== Flash Point Method:COC Flash Point:190F,88C Extinguishing Media:DRY CHEMICAL, CO2, FOAM OR WATER FOG. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . KEEP FROM EXTREME HEAT OR OPEN FLAME. WATER MAY CAUSE FROTHING. Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID. AVOID BREATHING PRODUCTS OF COMBUSTION WHICH INCLUDE FUMES, SMOKE, CO & CO2. ================== Accidental Release Measures ================== Spill Release Procedures:ELIMINATE IGNITION SOURCES. NORMAL PRECAUTIONARY MEASURES FOR HANDLING LUBRICATING OILS ARE SATISFACTORY. COLLECT WITH ABSORBENTS. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:COMBUSTIBLE LIQUID. AVOID TEMPERATURES >50C (120F) FOR PROLONGED PERIODS. AVOID OR CONTAIN OIL MISTS. KEEP FROM FLAMES, SPARKS OR HOT SURFACES. Other Precautions:PERSONS EXPOSED TO OIL MISTS SHOULD WEAR NIOSH/MSHA APPROVED RESPIRATORS. AVOID PROLONGED OR REPEATED SKIN CONTACT. DO NOT GET IN EYES. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NORMALLY NONE REQUIRED. IF HIGH VAPOR OR MIST CONCENTRATIONS USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC VAPORS OR MISTS. Ventilation:NONE NORMALLY REQUIRED. Protective Gloves:OIL RESISTANT GLOVES. Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:WEAR BODY-COVERING CLOTHING TO AVOID REPEATED OR PROLONGED EXPOSURE. Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. LAUNDER SOILED WORK CLOTHES BEFORE REUSE. NEVER WEAR OIL SOAKED CLOTHING. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:V4 Vapor Pres:<20 Vapor Density:>1 Spec Gravity:0.911 (H2O=1) Evaporation Rate & Reference:<1 (BUTYL ACETATE=1) Solubility in Water:NEGLIGIBLE Appearance and Odor:COLOR ASTM 3.5:TYPICAL BLUE GREEN DYE ADDED TO FORMULA. ODOR:FLUID MINERAL OIL. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS. Stability Condition to Avoid:OVERHEATING FOR EXTENDED PERIODS WILL CAUSE OXIDATIVE DEGRADATION. Hazardous Decomposition Products:CO, CO2. ==================== Disposal Considerations ==================== Waste Disposal Methods:MUST BE DISPOSED OF ACCORDING TO LOCAL, STATE & FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.