ZYNOLYTE PRODUCTS CO -- SPEED-E-NAMEL -- 8010-00N006431
===================== Product Identification ===================== Product ID:SPEED-E-NAMEL MSDS Date:01/01/1985 FSC:8010 NIIN:00N006431 === Responsible Party === Company Name:ZYNOLYTE PRODUCTS CO Emergency Phone Num:213-604-1333 CAGE:25461 === Contractor Identification === Company Name:ZYNOLYTE PRODUCTS CO Address:2320 E DOMINGUEZ ST Box:6244 City:CARSON State:CA ZIP:90749 Country:US Phone:310-513-0700 CAGE:25461 ============= Composition/Information on Ingredients ============= Ingred Name:METHYLENE CHLORIDE (SARA III) CAS:75-09-2 RTECS #:PA8050000 Fraction by Wt: 42% OSHA PEL:500 PPM/C,1000; Z2 ACGIH TLV:50 PPM, A2; 9192 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:ALIPHATIC HYDROCARBON Fraction by Wt: 9% ACGIH TLV:150 PPM (MFR) Ingred Name:AROMATIC HYDROCARBON SOLVENT Fraction by Wt: 2% ACGIH TLV:200 PPM (MFR) Ingred Name:ISOBUTANE PROPANE PROPELLENT Fraction by Wt: 33.5% ===================== Hazards Identification ===================== Effects of Overexposure:EYE: IRRITATION. VAPORS: ANESTHETIC ======================= First Aid Measures ======================= First Aid:EYE: FLUSH WITH WATER 15 MINUTES,TAKE TO PHYSICIAN. INHALATION: REMOVE FROM EXPOSURE,GIVE ARTIF RESP IF NEEDED,CALL PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point:FLAME EXTEN: 28" Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER FOG TO COOL EXPOSED CONTAINERS Unusual Fire/Explosion Hazard:PRESSURIZED PRODUCT,EXPOSURE TO HIGH HEAT MAY CAUSE BURSTING. ================== Accidental Release Measures ================== Spill Release Procedures:N/A (MFR) ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH EXPOSURE OF CONCERN Ventilation:LOCAL/MECHANICAL Eye Protection:SAFETY GLASSES Supplemental Safety and Health ================== Physical/Chemical Properties ================== Vapor Density:>1 Evaporation Rate & Reference:SLOWER THAN ETHER Percent Volatiles by Volume:86.5 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES Stability Condition to Avoid:TEMP ABOVE 120F/48C ==================== Disposal Considerations ==================== Waste Disposal Methods:COMPLY WITH LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT INCINERATE OR PUNCTURE CANS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.