=====================  Product Identification  =====================

Product ID:SPRAY BELT DRESSING
MSDS Date:01/01/1985
FSC:8030
NIIN:00N002575
MSDS Number: BCJDS
=== Responsible Party ===
Company Name:DAYTON ELECTRIC MFG CO.
Emergency Phone Num:312-647-8900
CAGE:16327
=== Contractor Identification ===
Company Name:DAYTON ELECTRIC MFG. CO.
Address:5959 W. HOWARD ST.
Box:City:CHICAGO
State:IL
ZIP:60648-4014
Country:US
Phone:800-323-0620
CAGE:16327

=============  Composition/Information on Ingredients  =============

Ingred Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: <5%
OSHA PEL:100 PPM

Ingred Name:ISOBUTANE (PROPELLANT)
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 10%
ACGIH TLV:1000 PPM (MFR)

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 10%
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

Ingred Name:METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE)  (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 50%
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

Effects of Overexposure:LIGHT-HEADEDNESS,GIDDINESS,SHORTNESS OF BREATH
    & POSSIBLE NAUSEA

=======================  First Aid Measures  =======================

First Aid:REMOVE TO FRESH AIR-CALL PHYSICIAN. EYE: FLUSH THOROUGHLY W/
    WATER-CALL DOCTOR

=====================  Fire Fighting Measures  =====================

Flash Point:<20F,-7C; TOC
Lower Limits:1
Extinguishing Media:CO*2,DRY CHEM,FOAM,WATER MAY BE INEFFECTIVE-USE TO
    COOL CANS
Fire Fighting Procedures:WEAR PRESSURE DEMAND SCBA & FULL PROTECT
    CLOTHING
Unusual Fire/Explosion Hazard:DO NOT SPRAY NEAR OPEN FLAME. KEEP @ ROOM
    TEMP.AS EXPOS TO DIRECT SUNLIGHT/OTHER HEAT CAUSE BURSTING

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION,VENTILATE.
    AVOID BREATHING VAPORS & REMOVE W/ INERT ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. KEEP @ ROOM
    TEMP EXPOSE TO DIRECT SUNLIGHT OR OTHER HEAT MAY CAUSE BURSTING. DO
    NOT PUNCTURE OR INCINERATE
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
    VICINITY OF ARC WELDING,OPEN FLAMES OR HOT SURFACES. HEAT AND/OR UV
    RADIATION MAY CAUSE FORMATION OF HCL AND/OR PHOSGENE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD RESPIRATOR IF NEEDED TO AVOID
    BREATH VAPOR OR MIST
Ventilation:LOCAL-TO KEEP CONC BELOW TLV
Eye Protection:RECOMMENDED
Supplemental Safety and Health
BOILING POINT,EVAPORATION RATE & FLASH POINT ARE FOR THE PROPELLANT.
    AEROSOL-CONTENTS UNDER PRESSURE: 52 PSIG.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:<0F;-18
Vapor Density:<1
Evaporation Rate & Reference:FASTER THAN ETHER
Percent Volatiles by Volume:80

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:DO NOT STORE ABOVE 120F,49C
Hazardous Decomposition Products:CO,CO*2,HYDROGEN CHLORIDE,PHOSGENE
    UPON THERMAL DECOMP.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MFR STATES DO NOT INCINERATE. DISPOSE IAW FED,
    STATE & LOCAL CODES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.