AD-TECH PLASTIC SYSTEMS CORP -- MOLD RELEASE 1  -- 6850-00N074062
<pre>=====================  Product Identification  =====================

Product ID:MOLD RELEASE 1
MSDS Date:04/11/1995
FSC:6850
NIIN:00N074062
=== Responsible Party ===
Company Name:AD-TECH PLASTIC SYSTEMS CORP
Address:815 SHEPHERD ST
City:CHARLOTTE
State:MI
ZIP:48813
Country:US
Info Phone Num:800-255-9934
Emergency Phone Num:800-255-9934
CAGE:66058
=== Contractor Identification ===
Company Name:AD-TECH PLASTIC SYSTEMS
Address:815 SHEPHERD STREET
Box:City:CHARLOTTE
State:MI
ZIP:48813
Phone:517-543-7510
CAGE:66058

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT; (HYDROCARBON NAPHTHA)
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 80-90%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:NON HAZARDOUS INGREDIENT; (WAX/SILICON BLEND)
Fraction by Wt: 2-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:HEADACHE, NAUSEA, DIZZINESS FROM
    VAPORS. EXCESSIVE CONTACT WITH SKIN CAN CAUSE DEFATTING AND MILD
    IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:REDNESS AND/OR SWELLING OF AFFECTED AREAS.
Medical Cond Aggravated by Exposure:NOT DETERMINED.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH W/COLD WATER FOR AT LEAST 15 MINUTES. CONTACT MD.
    SKIN:WASH W/MILD SOAP & WATER. INHAL:REMOVE TO FRESH AIR. INGEST:DO
    NOT INDUCE VOMITING. CONTACT MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:103F,39C
Lower Limits:1%
Upper Limits:8%
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . AS FOR PETROLEUM PRODUCTS.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE ADEQUATE VENTILATION & REMOVE ALL
    SOURCES OF IGNITION. WIPE UP SPILLS W/ABSORBENT MATERIAL. SCRAPE UP
    DRIED RESIDUE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 100F. STORE AWAY FROM
    STRONG OXIDIZERS.
Other Precautions:KEEP AWAY FROM OPEN FLAMES & OTHER SOURCES OF
    IGNITION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:ONLY IF TLV IS EXCEEDED. NIOSH APPROVED ORGANIC
    VAPOR TYPE.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL): ADEQUATE.
Protective Gloves:POLYETHYLENE OR RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . CLEAN, BODY COVERING CLOTHING.
Work Hygienic Practices:PRACTICE GOOD HYGIENE & USE W/CAUTION TO AVOID
    EYE OR SKIN CONTACT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:310F,154C
Spec Gravity:0.78 (H*2O=1)
Evaporation Rate &amp; Reference:1 (BUTYL ACETATE=1)
Solubility in Water:SLIGHT
Appearance and Odor:OFF WHITE FLUID; NAPHTHA ODOR.
Percent Volatiles by Volume:80-90

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:HYDROCARBON DECOMPOSITION PRODUCTS AT
    HIGH TEMPERATURES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . DISPOSE OF I/A/W APPLICABLE LAWS FOR WAX DISPERSIONS.
    REQUIRES HAZARDOUS WASTE DESIGNATION D001 UNDER EPA-RCRA
    (IGNITABILITY).

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.