ITW BRAND MERCHANDISING -- SUPER GLUE  -- 8040-00F046532
<pre>=====================  Product Identification  =====================

Product ID:SUPER GLUE
MSDS Date:03/09/1992
FSC:8040
NIIN:00F046532
=== Responsible Party ===
Company Name:ITW BRAND MERCHANDISING
Address:226 GERRY DRIVE
City:WOOD DALE
State:IL
ZIP:60191-5000
Country:US
Info Phone Num:508-777-1100
Emergency Phone Num:508-777-1100
CAGE:ITWBD
=== Contractor Identification ===
Company Name:ITW BRAND MERCHANDISING
Address:226 GERRY DRIVE
City:WOOD DALE
State:IL
ZIP:60191-5000
Country:US
Phone:508-777-1100
CAGE:ITWBD

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYL-2-CYANOACRYLATE     *95-4*
CAS:7085-85-0
Fraction by Wt: 80-100%

Ingred Name:POLYMETHYLMETHACRYLATE, PLEXIGLAS  (CARCINOGEN BY IARC -
    GROUP 3) *95-4*
CAS:9011-14-7
RTECS #:TR0400000
Fraction by Wt: 1-5%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: BONDS EYELIDS/EYELID TO EYEBALL;
    LACHRYMATOR. SKIN: BONDS RAPIDLY. LARGE QUANTITIES MAY CAUSE BURNS.
    INHALATION: IRRITATION OF THE MUCOUS MEMBRANES & UPPER RESPIRATORY
    TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:LACHRYMATION, DOUBLE VISION, BURNS, IRRITATION

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH W/WATER FOR 30 MINS. DON'T ATTEMPT TO
    FORCE LIDS OPEN. SKIN: SOAK HANDS IMMEDIATLEY IN WARM WATER. REMOVE
    CURED ADHESIVE W/HOT SOAPY WATER, PEELING GENTLY FROM SKIN.
    INHALATION : MOVE TO FRESH AIR. INGESTION: POSITION PATIENT TO
    PREVENT INGESTION OF THE SOLID. OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:181F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS &
    PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:CLOTHS USED TO WIPE UP SPILLS MAY CAUSE
    RAPID POLYMERIZATION THAT COULD RESULT IN AUTO-IGNITION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL: WIPE UP W/CLOTH. IMMEDIATELY SOAK CLOTH
    W/WATER TO POLYMERIZE ADHESIVE. LARGE: DAM AREA W/DAMP/WET SAND.
    FLOOD W/WATER TO CAUSE POLYMERIZATION. WHEN CURED, REMOVE FILM W/A
    SCRAPER. WEAR NIOSH A PPROVED ORGANIC VAPOR RESPIRATOR/SCBA AS
    NEEDED.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE WELL-CLOSED IN A COOL, DRY
    PLACE. KEEP AWAY FROM HEAT/OPEN FLAMES. USE W/ADEQUATE VENTILATION.
Other Precautions:AVOID CONTACT W/SKIN, EYES & CLOTHING. READ
    INSTRUCTIONS CAREFULLY. DON'T WEAR RUBBER/CLOTH GLOVES AS
    PROTECTIVE EQUIPMENT. READ INSTRUCTIONS CAREFULLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:GOOD GENERAL VENTILATION ADEQUATE FOR OCCASIONAL USE. LOCAL
    EXHAUST TO KEEP VAPOR CONCENTRATIONS <THE TLV.
Protective Gloves:POLYETHYLENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING TO PREVENT SKIN & EYE
    CONTACT.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:140F
Vapor Pres:0.3
Vapor Density:>1
Spec Gravity:1.08-1.12
pH:(SUPP)
Evaporation Rate &amp; Reference:LOWER THAN BU ACETATE
Solubility in Water:INSOLUBLE (REACTS)
Appearance and Odor:CLEAR LIQUID W/PUNGENT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:NO
ALKALINE MATERIALS; UNCURED ADHESIVE REACTS W/MOISTURE--IN BULK. COULD
    REACT VIOLENTLY ON MIXING W/LIQUID WATER.
Stability Condition to Avoid:HIGH HUMIDITY & HIGH TEMPS
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN
Conditions to Avoid Polymerization:HEAT, OPEN FLAMES, CONTAMINATION
    W/WATER, RISE IN TEMPS & BUILDUP OF PRESSURE IN CLOSED CONTAINERS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE/SOLID ADHESIVE CAN BE LANDFILLED IN
    ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS. DON'T POUR DOWN
    THE DRAIN.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.