PLASTI-KOTE CO -- TARGET (SUPER ENAMEL) T-24 FLAT WHITE X7922 -- 8010-00F007680
=====================  Product Identification  =====================

Product ID:TARGET (SUPER ENAMEL) T-24 FLAT WHITE X7922
MSDS Date:03/01/1985
FSC:8010
NIIN:00F007680
=== Responsible Party ===
Company Name:PLASTI-KOTE CO
Address:1000 LAKE ROAD
City:MEDINA
State:OH
ZIP:44256
Info Phone Num:(216) 725-4511
Emergency Phone Num:(216) 725-4511
CAGE:FO306
=== Contractor Identification ===
Company Name:PLASTI-KOTE CO
Address:1000 LAKE ROAD
City:MEDINA
State:OH
ZIP:44256
Phone:(216) 725-4511
CAGE:FO306
Company Name:TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
Address:1000 LAKE ROAD
Box:City:MEDINA
State:OH
ZIP:44256
Country:US
Phone:330-725-4511
CAGE:07708

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE  (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 30-40%
Other REC Limits:750 PPM
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 5-10%
Other REC Limits:10 PPM
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ETHYL ALCOHOL (ETHANOL)
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: 5-10%
Other REC Limits:1000 PPM
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9192

Ingred Name:DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)
CAS:123-42-2
RTECS #:SA9100000
Fraction by Wt: 5-6%
Other REC Limits:50 PPM
OSHA PEL:50 PPM
ACGIH TLV:50 PPM; 9192

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: <5%
Other REC Limits:200 PPM
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: <23%
Other REC Limits:1000 PPM
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

Ingred Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: <23%
Other REC Limits:1000 PPM
OSHA PEL:1800 MG/CUM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CAN CAUSE NASAL,
    RSPIRATORY IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA,
    HEADACHE, POSSIBLE UNCONSCIOUSNESS, & EVEN ASPHYXIATION. INGESTION:
    CAN CAUSE GASTROINTESTINAL IRRITATION, NAU SEA, VOMITING &
    DIARRHEA. ASPIRATION OFMATERIAL INTO THE LUNGS CAN CAUSE CHEMICAL
    PNEUMONITIS WHICH CAN BE FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: CAN CAUSE NASAL, RESPIRATORY
    IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE,
    POSSIBLE UNCONSCIOUSNESS, & EVEN ASPHYXIATION. INGESTION: CAN CAUSE
    GASTROINTESTINAL IRRITATION, NA USEA, VOMITING & DIARRHEA.
    ASPIRATION OF MATERIAL INTO THE LUNGS CAN CAUSE CHEMICAL
    PNEUMONITIS WHICH CAN BE FATAL.

=======================  First Aid Measures  =======================

First Aid:INGESTION: DON'T INDUCE VOMITING, KEEP PERSON WARM, QUIET &
    GET MED ATT. ASPIRATION OF MATERIAL INTO THE LUNGS DUE TO VOMITING
    CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL. INGESTION: IF
    AFFECTED , REMOVE INDIVIDUAL TO FRESH AIR. IF BREATHING IS
    DIFFICULT, ADMINISTER OXYGEN. IF BREATHING HAS STOPPED, GIVE
    ARTIFICIAL RESPIRATION, KEEP PERSON WARM, QUIET & GET MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:0F
Lower Limits:1.1%
Extinguishing Media:CO2, DRY CHEMICAL OR ALCOHOL FOAM
Fire Fighting Procedures:VAPORS ARE >AIR/MAY TRAVEL ALONG THE
    GROUND/MOVED BY VENTILATION/IGNITED BY FLAMES, SPARKS, HEATERS,
    SMOKING, OR OTHER IGNITION SOURCES.
Unusual Fire/Explosion Hazard:WATER MAY BE INEFFECTIVE. WATER MAY BE
    USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE
    BUILD-UP/AUTOIGNITION/EXPLOSION. IF USED, FOG NOZZLES ARE
    PREFERRABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR
    ABSORBENT, OR OTHER ABSORBENT MATERIAL & TRANSFER TO A CLOSED
    CONTAINER. ELIMINATE ALL IGNITION SOURCES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE IN AREAS >120F. OR IN
    DIRECT SUNLIGHT, NEAR HEAT OR OPEN FLAMES.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS PROTECTED FOR
    STORAGE OF NFPA CLASS IC FLAMMABLE LIQUIDS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV IS EXCEEDED, A NIOSH/MESA JOINTLY
    APPROVED SCBA W/A FULL FACE PIECE OPERATED IN PRESSURE DEMAND OR
    OTHER POSITIVE PRESSURE MODE IS ADVISED.
Ventilation:PROVIDE SUFFICIENT MECHANICAL & LOCAL EXHAUST VENTILATION
    TO KEEP AIR
Evaporation Rate & Reference:FASTER THAN ETHER
Percent Volatiles by Volume:85-90%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT: STRONG OXIDIZING AGENTS & HEAT.
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAME.
Hazardous Decomposition Products:CO

====================  Disposal Considerations  ====================

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
    DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
    LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.