WOOSTER PRODUCTS INC -- CONSTRUCTION ADHESIVE -- 8040-00F023467
===================== Product Identification ===================== Product ID:CONSTRUCTION ADHESIVE MSDS Date:01/11/1989 FSC:8040 NIIN:00F023467 === Responsible Party === Company Name:WOOSTER PRODUCTS INC Address:1000 SPRUCE ST City:WOOSTER State:OH ZIP:44691-4654 Country:US Info Phone Num:(216) 264-2844 Emergency Phone Num:(216) 264-2844 CAGE:79434 === Contractor Identification === Company Name:WOOSTER PRODUCTS INC Address:1000 SPRUCE ST Box:City:WOOSTER State:OH ZIP:44691 Country:US Phone:216-264-2844 CAGE:79434 ============= Composition/Information on Ingredients ============= Ingred Name:HEXANE, N-HEXANE CAS:110-54-3 RTECS #:MN9275000 Fraction by Wt: 35% Other REC Limits:50 PPM OSHA PEL:500 PPM ACGIH TLV:50 PPM; 9293 EPA Rpt Qty:1 LB DOT Rpt Qty:1 LB ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:INHALATION: RESPIRATORY IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, & UNCONSCIOUSNESS. SKIN: DERMATITIS & IRRITATION. EYES: IRRITATION, REDNESS, TEARING, & BLURRED VISION. Explanation of Carcinogenicity:NONE Effects of Overexposure:INHALATION: RESPIRATORY IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, & UNCONSCIOUSNESS. SKIN: DERMATITIS, & IRRITATION. EYES: IRRITATION, REDNESS, TEARING, & BLURRED VISION. Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS OR SENSITIVITY TO SOLVENT VAPORS & SKIN SENSITIVITY TO SOLVENTS ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR. ADMINISTER ARTIFICIAL RESPIRATION IF BREATHING STOPS. SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point:-7F Lower Limits:1.1% Upper Limits:7.5% Extinguishing Media:FOAM, DRY CHEMICAL, OR CO2 Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS W/FULL FACE-PIECE OPERATED IN PRESSURE DEMAND OR OTHER POSITIVE PRESSURE MODE. Unusual Fire/Explosion Hazard:VAPORS RE >AIR & MAY IGNITE EXPLOSIVELY. ADHESIVE, FLAMMABLE LIQUID. UN 1133. ================== Accidental Release Measures ================== Spill Release Procedures:EXTINGUISH ALL FLAMES, SPARKS, & OTHER IGNITIONS SOURCES. VENTILATE AREA. PICK UP W/NON-METALLIC MATERIAL, SUCH AS CARDBOARD OR PLASTIC SHOVELS. PLACE IN NON-LEAKING CONTAINER. ALLOW RESIDUE TO DRY & SCRAPE UP FILM. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE IN COOL, DRY PLACE. KEEP AWAY FROM ALL SPARK GENERATING DEVICES. PROVIDE ADEQUATE VENTILATION WHILE USING. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH - 1000 PPM: SA/SCBA; 2500 PPM: SA:CF; 5000 PPM: SCBAF/SAF Ventilation:LOCAL EXHAUST TO PREVENT BUILD-UP OF VAPORS. MECHANICAL (GENERAL): USE EXPLOSION-PROOF MOTORS Protective Gloves:NITRILE RUBBER Eye Protection:CHEMICAL GOGGLES Other Protective Equipment:PROTECTIVE CLOTHING Work Hygienic Practices:USE GOOD HOUSEKEEPING PRACTICES Supplemental Safety and Health ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:156F Vapor Pres:124 Vapor Density:>1 Spec Gravity:1.10 Evaporation Rate & Reference:(BU AC = 1): >1 Solubility in Water:NEGLIGIBLE Appearance and Odor:YELLOW PASTE W/SOLVENT ODOR ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, ELECTRICAL DEVICES, FURNANCES, STOVES, & OTHER IGNITION SOURCES Hazardous Decomposition Products:CO2, CO, & VARIOUS HYDROCARBONS ==================== Disposal Considerations ==================== Waste Disposal Methods:WET ADHESIVE IS FLAMMABLE & DESIGNATED AS HAZARDOUS WASTE. DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE, & LOCAL REGULATIONS. ADHESIVE, FLAMMABLE LIQUID. UN 1133. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.