U.S.GYPSUM COMPANY -- HYDROCAL FGR-95 GYPSUM CEMENT -- 5610-00D001222
===================== Product Identification ===================== Product ID:HYDROCAL FGR-95 GYPSUM CEMENT MSDS Date:01/01/1987 FSC:5610 NIIN:00D001222 === Responsible Party === Company Name:U.S.GYPSUM COMPANY Emergency Phone Num:312-321-4382 CAGE:EO096 === Contractor Identification === Company Name:GS METALS CORP Address:RR NO 4 BOX 7 Box:City:PINCKNEYVILLE State:IL ZIP:62274 Country:US Phone:618-357-5353 CAGE:25117 Company Name:U.S.GYPSUM COMPANY CAGE:EO096 ============= Composition/Information on Ingredients ============= Ingred Name:PRODUCT CONSISTS OF 99% GYPSUM & 1% PROPRIETARY,NON-HAZARDOUS INGRED; WHERE GYPSUM CONSIS RTECS #:9999999ZZ Ingred Name:TS OF ABOUT 95% CALCIUM SULFATE & 5% OF SAND,CLAY & CACO*3; THE DIFFERENCE BETWEEN EACH RTECS #:9999999ZZ Ingred Name:OF THESE "MULTIPURPOSE HYDROCAL PRODUCTS" IS THE SETTING & HARDENING TIME. RTECS #:9999999ZZ ===================== Hazards Identification ===================== Effects of Overexposure:MAY DEVELOP SUFFICIENT HEAT TO CAUSE BURNS IF A LARGE MASS IS KEPT IN CONTACT WITH SKIN WHILE HARDEN ======================= First Aid Measures ======================= First Aid:EYE & SKIN:FLUSH OR WASH WITH WATER;INH:REMOVE TO FRESH AIR;ING:PLASTER HARDENS WHEN WETTED,AND IF INGESTED MAY RESULT IN OBSTRUCTION.SEE USAGE & PRODUCT SPEC FOR HARDENING TIME ===================== Fire Fighting Measures ===================== Extinguishing Media:NOT COMBUSTIBLE. Fire Fighting Procedures:NONE Unusual Fire/Explosion Hazard:NONE ================== Accidental Release Measures ================== Spill Release Procedures:SWEEP UP. AVOID CREATING EXCESSIVE DUST. SLURRY MAY PLUG DRAINS. ====================== Handling and Storage ====================== Handling and Storage Precautions:DEW POINT CONDITIONS,OR OTHER CONDITIONS CAUSING PRESENCE OF LIQUID WATER WILL HARDEN DURING STORAGE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH-APPROVED RESPIRATOR FOR NUISANCE DUST. Ventilation:LOCAL EXHAUST IF ABOVE TLV. Protective Gloves:NONE Eye Protection:SAFETY GLASSES Other Protective Equipment:NONE Supplemental Safety and Health MSDS DATED 5-15-86. ================== Physical/Chemical Properties ================== HCC:N1 Boiling Pt:B.P. Text:DECOMPOSES Spec Gravity:2.7 Solubility in Water:0.2% Appearance and Odor:WHITE POWDER,LOW ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES Hazardous Decomposition Products:ABOVE 1450C: SO*2 & CAO. ==================== Disposal Considerations ==================== Waste Disposal Methods:NORMAL DISPOSAL AS FOR ANY DRY INERT POWDER. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.