JOHN P. NISSEN JR,. CO. -- NISSEN METAL MARKER  -- 7520-00-721-9368
<pre>=====================  Product Identification  =====================

Product ID:NISSEN METAL MARKER
MSDS Date:07/01/1991
FSC:7520
NIIN:00-721-9368
=== Responsible Party ===
Company Name:JOHN P. NISSEN JR,. CO.
Address:2544 FAIRHILL AVE.
Box:188
City:GLENSIDE
State:PA
ZIP:19038
Country:US
Info Phone Num:215-886-2025
Emergency Phone Num:215-886-8213
Preparer's Name:EUGENE A. GARN
CAGE:LO853
=== Contractor Identification ===
Company Name:JOHN P. NISSEN JR,. CO.
Address:2544 FAIRHILL AVE.
Box:188
City:GLENSIDE
State:PA
ZIP:19038
Country:US
Phone:215-886-2025
CAGE:LO853
Company Name:JOHN P. NISSEN JR., CO.
Address:2544 FAIRHILL AVE
Box:339
City:GLENSIDE
State:PA
ZIP:19038
Country:US
Phone:215-886-2025 (OFFICE)
CAGE:53034

=============  Composition/Information on Ingredients  =============

Ingred Name:XYLENE (SARA 313) (CERCLA)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 16-21%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:AROMATIC PETROLEUM SOLVENT
CAS:64742-95-6
Fraction by Wt: 14-16%
Other REC Limits:50 PPM (EXXON)

Ingred Name:PRIMARY AMYL ACETATE
CAS:628-63-7
RTECS #:AJ1925000
Fraction by Wt: 0-10%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:LINSEED OIL, POLYMERIZED
CAS:67746-08-1
Fraction by Wt: 4-5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:N.I.A.
ACGIH TLV:N.I.A.

Ingred Name:POLYTUNG OIL
CAS:68038-50-6
Fraction by Wt: 11-13%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:N.I.A.
ACGIH TLV:N.I.A.

Ingred Name:CHLORINATED RUBBER RESIN
CAS:68441-58-7
Fraction by Wt: 15-28%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:N.I.A.
ACGIH TLV:N.I.A.

Ingred Name:TITANIUM DIOXIDE (RESPIRABLE NUISANCE DUST IN AIR
    5MG./CU.M.)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 5-38%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: DRYING, DEFATTING. INHAL:
    IRRITATING TO MUCOUS MEMBRANES. INGEST: VOMIT, ASPIRATION INTO
    LUNGS. CHRONIC: HEADACHE, DIZZY, NAUSEA, LOSS OF CONSCIOUSNESS.
Effects of Overexposure:CNS DEPRESSION (HEADACHE, DIZZY, NAUSEA, LOSS
    OF CONSCIOUSNESS).
Medical Cond Aggravated by Exposure:EYE IRRITATION, SKIN IRRITATION AND
    DERMATITIS.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/WATER FOR 15 MINUTES. SKIN: WASH W/SOAP & WATER.
    INHAL: GET FRESH AIR. ARTIFICIAL RESPIRATION IF NEEDED. INGEST:
    DONT INDUCE VOMIT. IN ALL CASES, GET MED AID.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:81.0F,27.2C
Lower Limits:1.1%
Upper Limits:6.6%
Extinguishing Media:WATER FOG, CHEMICAL FOAM, DRY CHEMICAL POWDER OR
    CO2.
Fire Fighting Procedures:DONT USE WATER. AVOID BREATHING VAPORS.
Unusual Fire/Explosion Hazard:COOL FIRE EXPOSED CONTAINERS W/WATER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCOOP UP & WIPE UP SPILLS. (SAME AS OTHER
    PAINT & PROTECTIVE COATINGS).

======================	Handling and Storage  ======================

Handling and Storage Precautions:READ ALL LABEL CAUTIONS. STORE AWAY
    FROM IGNITION SOURCES.
Other Precautions:HANDLE AS FLAMMABLE LIQUID.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE IN NORMAL WORKING CONDITIONS.
Ventilation:LOCAL EXHAUST IN NORMAL WORKING CONDITIONS.
Protective Gloves:NONE NEEDED
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:NONE
Work Hygienic Practices:NORMAL, SAME AS ANY PAINT PRODUCT.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:278 TO 290F
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:9.0
Vapor Density:3.7
Spec Gravity:1.09-1.39
Evaporation Rate &amp; Reference:0.6
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS LIQUID, W/AROMATIC SOLVENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NK
Stability Condition to Avoid:AVOID HEAT, SPARKS, FLAME & OTHER IGNITS.
Hazardous Decomposition Products:INCOMPLETE BURNING MAY RELEASE CO, CO2
    & HC1.
Conditions to Avoid Polymerization:PROLONGED HIGH STORAGE TEMPERATURE
    (>105F).

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE AND
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.